Universal Serial Bus Cables and Connectors Class Document
Revision 2.0
August 2007

目的

This document describes the mechanical, electrical, environmental, design and performance criteria and voluntary supplier compliance requirements for USB connectors, cable and fabricated cable assemblies. In addition, this document provides detailed requirements for the design, approval and implementation of application specific USB connectors and fabricated cable assemblies.

范圍

The information provided in this document serves as a guideline for design, development and voluntary compliance testing of USB connectors and fabricated cables assemblies, as well as defining mechanical, electrical, environmental and performance characteristics. As such, it defines how USB connectors, cable and fabricated cables assemblies are to be implemented and how manufacturers and/or fabricators will interact with the voluntary compliance requirements.

相關(guān)文件

American Society for Testing and Materials

ASTM-D-4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable. This specification is available through the World Wide Web site http://www.astm.org/

ASTM-D-4566 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable. This specification is available through the World Wide Web site http://www.astm.org/

ANSI/EIA 364-C Electrical Connector/Socket Test Procedures Including Environmental Classifications, approved 1994. Available in hard copy – reference search site http://www.nssn.org/information.html

Underwriters Laboratories

UL STD-94 Test procedures used to classify polymeric materials 94HB, 94V-1, 94V-2, 94-5VA, 94-5VB, 94VTM-0, 94VTM-1, 94VTM-2, 94HBF, 94HF-1, and 94HF-2. This
specification is available through the World Wide Web site http://www.comm-2000.com/
UL Subject-444 Type CMP (plenum cable), Type CMR (riser cable), Type CM (commercial cable), and Type CMX (cable for restricted use. This specification is available through the World Wide Web site http://www.comm-2000.com/

[USB2.0] Universal Serial Bus Specification, revision 2.0 (also referred to as the USB Specification). This specification is available on the World Wide Web site http://www.usb.org.

USB On-The-Go On-The-Go Supplement to the USB 2.0 Specification (also referred to as the USB On-The-Go Specification)

貢獻(xiàn)者

Name Company E-mail Address
James R. Koser Foxconn Electronics – CCWG Chair jim.koser@foxconn.com
Tsuneki Watanabe Foxconn Electronics t.watanabe@foxconn.com
Jim Zhao Foxconn Electronics Jim.zhao@foxconn.com
George G. Olear II Contech Research – Co-Editor ggo@contechresearch.com
Jaremy Flake ATL Technology – CCWG Scribe jaremyf@atlconnect.com
Glen Chandler Acon glenc@acon.com
George Yee Acon George.Yee@acon.com
Roy Ting ELKA International Ltd. roy@elka.com.tw
Sophia Liu ETC (Electronic Test Center, Taiwan) scl@etc.org.tw
Bill Northey FCI William.northey@fciconnect.com
Jack Lu Foxlink International, Inc. Jack_lu@foxlink.com
Wen Yang Foxlink International, Inc. wen@foxlink.com
Yasuhiro Ishii Fujikura Ltd Yishii@fujikura.co.jp
Shigreu Ashida Fujikura Ltd Ashidas@fujikura.co.jp
Marksuk Piyavit Fujikura Ltd MPiyavit @fujikura.com
Hiromichi Kato Fujikura Ltd pakl@fujikura.com
Sathid Inthon Fujikura Ltd isathid @fujikura.com
Makoto Kikuchi Fujikura Ltd mkikuchi@fujikura.co.jp
Hiroshi Nakazawa Hirose Electric Co. Ltd Hiroshi Nakazawa@hirose.co.jp
Yousuke Takeuchi Hirose Electric Co. Ltd Yousuke_Takeuchi@hirose.co.jp
Shinya Tono Hirose Electric Co. Ltd Shinya_tohno@hirose.co.jp
Karl Kwiat Hirose Electric Co. Ltd kkwiat@hirose.com
Kazunori Ichikawa Hirose Electric Co. Ltd Kazunori_Ichikawa@hirose.co.jp
Toshi Sasaki Honda Connectors t.sasaki@honda-connectors.co.jp
Jim Eilers Hosiden eilersjm@hoaco.com
Tsuyoshi Kitagawa Hosiden kitagawat@hoaco.com
David Suryoutomo Japan Aviation Electronics, Inc suryoutomod@jae.com
Ron Muir Japan Aviation Electronics, Inc muirr@jae.com
Kazuhiro Saito Japan Aviation Electronics, Inc saitouk@jae.co.jp
Takahiro Deguchi JST Mfg. Co. Ltd tdeguchi@jst-mfg.com
Yasuhira Miya JST Mfg. Co. Ltd ymiya@jst-mfg.com
Revision 2.0 Cables and Connectors Class Document
Yoichi Nakazawa JST Mfg. Co. Ltd ynakazawa@jst-mfg.com
Hironori Handa JST Mfg. Co. Ltd hhanda@jst-mfg.com
Vincent Chen Longwell vince@longwell.com
Ron Ward Matsushita Electronics rward@us.pewg.panasonic.com
Hitoshi Kawamura Mitsumi h_kawamura@sales.mitsumi.co.jp
Atsushi Nishio Mitsumi a_nishio@eeb.mitsumi.co.jp
Yasuhiko Shinohara Mitsumi y_shinohara@eeb.mitsumi.co.jp
Scott Sommers Molex Scott.sommers@molex.com
E. Mark Rodda Motorola PCS markrodda@motorola.com
Sheldon Singleton National Technical Systems sheldons@ntscorp.com
Sam Liu Newnex saml@newnex.com
Jan Fahllund Nokia Corporation Jan.h.fahllund@nokia.com
Kai Silvennoine Nokia Corporation Kai.silvennoine@nokia.com
Richard Petrie Nokia Corporation Richard.petrie@nokia.com
Jussi Takaneva Nokia Corporation Jussi.Takaneva@nokia.com
Panu Ylihaavisto Nokia Corporation Panu.Ylihaavisto@nokia.com
Arthur Zarnowitz Palm arthur.zarnowitz@palm.com
Dave Peters Palm dave.peters@palm.com
Tetsuji Kawaguchi Panasonic (Matsushita) t Kawaguchi@us.pewg.panasonic.com
Satoshi Yamamoto Panasonic (Matsushita) koteyamd@sei.mew.co.jp
Tsuyoshi Yamane Panasonic (Matsushita) Yamane.tsuyoshi@mail.mew.co.jp
Naoyuki Ono SMK Naoyuki@smk.co.jp
Eric Yagi SMK s-yagi@smkusa.com
Scott Shuey Tyco Electronics. scott.shuey@tycoelectronics.com
Masaru Ueno Tyco Electronics Ueno.masaru@ tycoelectronics.com
Mark Paxson USB-IF. mpaxson@vtm-inc.com
Ed Beeman 2010 Tech for USB-IF ed.beeman@2010tech.com

下載USB電纜及連接器分類（Rev 2.0），請?jiān)L問http://www.usb.org/developers/devclass_docs/CabConn20.pdf。